High thickness, maximum protection against aggressive environments, excellent adhesion and corrosion resistance. Suitable for substrates that are not perfectly prepared and in the presence of moisture, unprimed substrates, and old paints. Recommended for all structures and products exposed to severe chemical and physical stress. Saline fog – 1440 hours.
Galvanized Steel
Silica sanding up to grade SaS
Pre-existing coatings
Sandblasting if possible. When this is not the case, remove old layers that are not firmly fixed, then roughen the surface mechanically, manually-mechanically, or manually (sanding, wire brushing, etc.). Remove oil, grease, various contaminants using appropriate solvents or detergents.
EPX-0050
Specifications
2K Epoxy surface-tolerant ZNP (Grey)
PUR-0269
Specifications
2K Polyurethane (High-glossy)
.webp){kind=spacer}
