Production of metal structures and urban infrastructure

FEATURES
Often — resistance to moisture and sunlight
Often — large surfaces
Special appearance
Production of metal structures and urban infrastructure
Production of metal structures and urban infrastructure

Essential Technologies

01.
For indoor and outdoor use with minimum mechanical impact
For indoor and outdoor use with minimum mechanical impact
Zinc phosphate 1К Alkyd DTM. Fast drying, low costs. Saline fog — 200 hours.
Characteristics
Gloss:
Semi-matt
Layers:
1
Steel
Sanding grade SA 2½
Galvanized Steel
Aluminium
Plastic Materials
Glass
Pre-existing coatings
Carefully remove old layers by sandblasting or mechanical cleaning
AKD-0114
AKD-0114
Specifications
1K Alkyd (Semi-matt)
DFT:
40-60 µ
Total DFT
Technical Documentation
12.
For indoor and outdoor use with high anticorrosion requirements
For indoor and outdoor use with high anticorrosion requirements
Good corrosion protection. Excellent resistance to light and weather conditions, excellent image density and clarity. High stability. Recommended as a two-layers cycles where an excellent (or a special) final appearance is required.
Characteristics
Gloss:
Matt
Layers:
2
Steel
Sanding grade SA 2½
Galvanized Steel
Silica sanding up to grade SaS
Aluminium
Sanding with non-metallic abrasives up to grade SaS
Plastic Materials
Wash with acetone, isopropyl alcoholб or specific solvents
Glass
Pre-existing coatings
Carefully remove old layers by sandblasting or mechanical cleaning
ACR-0020
ACR-0020
Specifications
2K Acrylic ZNP (Light-grey or beige)
DFT:
40-80 µ
ACR-0132
ACR-0132
Specifications
2K Acrylic (Matt)
DFT:
60-90 µ
Total DFT
100-170 µ
Technical Documentation
20.
For indoor and outdoor use with extreme anti-corrosion requirements
For indoor and outdoor use with extreme anti-corrosion requirements
High thickness, maximum protection against aggressive environments, excellent adhesion and corrosion resistance. Suitable for substrates that are not perfectly prepared and in the presence of moisture, unprimed substrates, and old paints. Recommended for all structures and products exposed to severe chemical and physical stress. Saline fog – 1440 hours.
Characteristics
Gloss:
High-glossy
Layers:
2
Steel
Sanding grade SA 2½
Galvanized Steel
Silica sanding up to grade SaS
Aluminium
Plastic Materials
Glass
Pre-existing coatings
Sandblasting if possible. When this is not the case, remove old layers that are not firmly fixed, then roughen the surface mechanically, manually-mechanically, or manually (sanding, wire brushing, etc.). Remove oil, grease, various contaminants using appropriate solvents or detergents.
EPX-0050
EPX-0050
Specifications
2K Epoxy surface-tolerant ZNP (Grey)
DFT:
min 95 µ
PUR-0269
PUR-0269
Specifications
2K Polyurethane (High-glossy)
DFT:
50-70 µ
Total DFT
145-300 µ
Technical Documentation
Production of metal structures and urban infrastructure
Production of metal structures and urban infrastructure

Explore More